The AXIS ASG1530 takes the modern enclosed-gantry concept and rebuilds it for Australian workshops and Australian Standards – not just to tick a box on a spec sheet.

With a 1550 × 3100 mm cutting area and your choice of 3 kW or 6 kW fibre laser power, it’s ideal for general fabrication, jobbing work, ducting, enclosures, brackets and plate components.

• Cutting area: 1550 × 3100 mm
• Power options: 3 kW or 6 kW
• Control stack: Full BOCI – CYPCUT – BOCHU ecosystem
• Laser source: MAXPHOTONICS G5, standard – designed from the ground up to safely cut highly reflective materials such as aluminium and brass, with no extra cost to upgrade.

The ASG1530 uses an enclosed gantry over an open table:

• Fully guarded cutting gantry over the work zone keeps the Class 4 beam, sparks and spatter securely contained.
• Open-top bed so you can still load sheets and remnants easily by crane or forklift.
• As it’s a fully enclosed gantry, the cutting process itself is not directly visible – cutting status is monitored via the control system and software, not by looking into the cutting area.

The AXIS ASG1530 is engineered to help you align with recognised laser safety and safety-of-machinery principles, as well as typical Australian electrical expectations – instead of leaving you to “make it compliant later”.

Australian Standards–Style Checklist

(Engineering measures – not just labels and stickers)

Laser safety & guarding

• Enclosed cutting gantry over the work zone to contain the Class 4 beam path.
• Designed so that, when installed with appropriate guarding, extraction and procedures, it can form part of a controlled laser area rather than an open Class 4 hazard.

Interlocks & emergency stopping

• Safety interlocks on access doors to the cutting area – open a guarded door and laser/motion are inhibited.
• Monitored emergency-stop circuits using a safety-oriented architecture.

Electrical & control integrity

• 24 VDC control circuits separated from mains power.
• Lockable main isolator positioned for safe lockout/tagout.
• Industrial-grade switchgear and clearly arranged wiring to suit Australian expectations.

Operator environment

• Connection points for compliant fume extraction.
• Logical cable routing and guarding to minimise trip hazards.
• Clear English-language manuals and guidance to assist with WHS risk management.

Every AXIS ASG1530 ships standard with a MAXPHOTONICS G5 fibre laser source:

• Designed to process carbon steel, stainless steel, aluminium, brass, copper and other common sheet metals.
• Engineered specifically to safely cut highly reflective materials like aluminium and brass.
• No “high-reflective surcharge” – you don’t pay extra to handle these materials.

MAXPHOTONICS have an authorised Australian repair and service agent, giving additional reassurance on long-term support.

To match the two power levels, the ASG1530 uses BOCI BLT-series intelligent cutting heads:

BLT310 – matched to 3 kW

• Smart, compact cutting head designed for medium and low power fibre lasers.
• Multiple intelligent sensors providing real-time monitoring and early warning for issues like pressure and temperature.
• Integrated water cooling keeps optics stable over long shifts.

Perfect for the 3 kW ASG1530 where you want reliable, efficient cutting without overspending on head capacity.

BLT421S – built for 6 kW

• Higher-spec head from the BLT4 series, well suited to medium–high power cutting.
• Fast focusing, allowing quick change-over between thin and thicker materials.
• Extensive water-cooled zones across the optical path for stable operation at higher powers.
• Collision protection features to help protect the head and minimise downtime if something goes wrong.

Together, the BLT310 and BLT421S give you cutting heads properly matched to the power of the machine.

The AXIS ASG1530 runs on the CypCut + FSCUT control platform – an industry-standard fibre laser cutting systemwith a huge installed base worldwide and a long track record in serious production environments.

That means:

• operators who’ve used modern fibre lasers before will feel at home, and
• you get a proven, stable control system with strong long-term support and plenty of available training resources.

Under the hood, the machine can be supplied with:

• FSCUT2000E – ideal for the 3 kW ASG1530, handling motion, laser and gas control in a single, integrated EtherCAT system.
• FSCUT4000E – the natural partner for the 6 kW ASG1530, offering higher dynamic performance and tighter motion control for thicker plate and higher speeds.

Because both run the same CypCut software, your operators enjoy essentially identical features and workflow on both power levels.

Smart Cutting Features as Standard

CypCut brings a big toolkit of cutting features to the ASG1530, including:

• Integrated CAD/CAM + control
  Import DXF and other common file types, clean them up, nest parts and send them to the machine from one interface.
• Automatic geometry cleanup
  Remove double lines, join broken segments, detect inside/outside contours and fix tiny gaps before you cut.
• Advanced nesting
  Powerful nesting tools to squeeze the maximum parts out of every sheet and reduce scrap.
• Micro-joint and tab control
  Multiple micro-joint strategies (including “smooth” / “low-mark” styles) to keep parts in the sheet without leaving big nibs to grind off.
• Dynamic corner & contour control
  Automatic slow-down and power adjustment on sharp corners and small holes to improve edge quality and reduce burring.
• High-speed fly cutting
  Fly-cut modes for thin sheet, small holes and repetitive patterns to really take advantage of the 6 kW version on light gauge work.
• Piercing strategies
  Multi-stage piercing options for thicker material to minimise spatter, protect optics and improve reliability.
• Process libraries
  Store and recall cutting parameters for different materials and thicknesses so operators get consistent results day in, day out.
• Remote diagnostics-ready
  Combined with the built-in remote access on the ASG1530, the CypCut/FSCUT stack allows us to help with tuning, troubleshooting and training without always needing a site visit.

You’re not getting “cheap and cheerful” software – you’re getting a mature, industry-leading platform built specifically for fibre laser cutting.

*Indicative maximum thicknesses for quality cutting with nitrogen or compressed air assist gas.
(Actual performance depends on material quality, gas supply and cut requirements.)

*These values are presented as a guide for brochure and planning purposes only.
Final cutting capacities and speeds should always be confirmed with test cuts on your own materials and gas supply.

You can also note:

With the optional 16 bar Peerless compressor package, many users will cut suitable thinner mild steel and aluminium using compressed air, dramatically reducing assist gas costs on non-cosmetic work.

Build the system around your preferred process:

• Light curtains
  Additional perimeter safeguarding around load/unload zones where required.
• Remote control stand
  A mobile operator/control stand so that, when you choose the light curtain option, the operator station is positioned outside the safety barrier, while still keeping controls conveniently at hand.
• 16 bar Peerless air compressor
  High-pressure air package suitable for cutting with compressed air on suitable materials and thicknesses, reducing nitrogen usage on appropriate jobs.
• Dust collection systems
• 4-cartridge dust collector recommended for the 3 kW machine.
• 6-cartridge dust collector recommended for the 6 kW machine.

Every AXIS ASG1530 includes:

• 36-month warranty on the machine (from handover after training).
• 24-month warranty on the MAXPHOTONICS G5 laser source.
• 100 cutting tips and 50 protective lenses supplied with the machine – for most users this represents up to around two years’ worth of consumables, so you’re not straight back in your pocket as soon as you start cutting.

We can support you in two ways:

1. Full service install (preferred)
• Our technicians come to site to handle setup, commissioning and operator training.
• We ensure the machine is dialled in, cutting well and integrated properly into your workshop.
• A small investment for peace of mind.
• (Strongly recommended for first-time laser purchasers.)
2. Guided self-install (for confident teams)
• You handle the physical installation and utilities.
• We supply step-by-step video guidance and support to bring the machine online.

Every ASG1530 ships with remote access pre-installed, so we can:

• assist with diagnostics and fault-finding,
• help with software settings and process tweaks, and

reduce downtime without always needing an on-site visit.

All prices include delivery into mainland Australian capital city metropolitan areas.
Please add $1,500 for Hobart.
For all other locations (regional centres, remote sites, islands, etc.), please ask us for a specific freight quotation.