Teflon Cloth For PS-450FI/AI

Description

The teflon cloth PS-450FI AI 46mm is a dedicated replacement component for the PS-450FI and PS-450AI impulse heat sealers, sized at 46 × 30mm to fit the sealing jaw area without trimming or modification. It provides the non-stick, heat-resistant barrier that sits between the heating element and the bag film during every seal cycle, and is sourced specifically for the PS-450FI/AI range.

Key Features of the Teflon Cloth for the PS-450FI/AI Sealer

Each teflon cloth PS-450FI AI 46mm is manufactured from PTFE (polytetrafluoroethylene) fabric and dimensioned precisely for the PS-450FI and PS-450AI models. The features below reflect what this component delivers in regular service.

• Precise 46 × 30mm fit: Dimensions are matched specifically to the PS-450FI and PS-450AI models, providing correct coverage of the heating element area without any cutting or adaptation on installation.
• PTFE construction: The polytetrafluoroethylene fabric withstands repeated high-temperature cycles generated during impulse sealing, reducing the risk of bag material sticking to the jaw.
• Non-stick surface: The smooth PTFE surface allows sealed packaging to release cleanly after each cycle, helping to maintain seal integrity and keeping the jaw area free of residue build-up.
• Direct replacement part: Sourced as a genuine spare for the PS-450FI/AI range, this cloth installs without adaptation and restores the sealer to its original operating condition.
• GST-inclusive pricing: All prices include GST where applicable at the current rate, so the price shown is the price you pay.

Why the Teflon Cloth Wears and When to Replace It

In any impulse sealer, the teflon cloth sits directly between the hot element and the bag film during every seal cycle, making it one of the highest-wear consumable components in normal operation. Over time, the cloth can become discoloured, develop surface cracks, or begin to cause the bag film to adhere to the element. Once adhesion problems or uneven heat distribution appear, the cloth should be replaced promptly. Allowing a worn cloth to remain in service risks secondary damage to the heating element itself, which represents a more involved and costly repair. The teflon cloth PS-450FI AI 46mm is often replaced at the same time as the heating element and element tape as part of a standard service interval, and is available individually so operators can replace only this component when it is the only part showing wear.

Typical Applications

This teflon cloth suits any production or packaging environment where a PS-450FI or PS-450AI impulse sealer is in regular use. Typical industries include food packaging, medical supply packaging, retail bagging operations, and general warehousing or despatch environments where polythene or laminate bags are sealed in volume. Because it is available individually, there is no need to purchase a full repair kit when only the cloth requires attention.

If your sealer requires a broader service rather than a single component replacement, the Repair Kit for PS-450FC Sealer is available for a closely related model in the PS-450 range and bundles the key consumable components needed to restore sealer performance in a single purchase. For the PS-450FI/AI specifically, the teflon cloth PS-450FI AI 46mm can be ordered on its own so you replace only what is needed and keep downtime to a minimum.